Water Sort Solver for water sort puzzles · unknown ? colors · 3–5 layers

This free water sort puzzle solver searches for the fewest pours on levels of 4 to 14 tubes with 3, 4 or 5 layers and up to 12 colors, in your browser with no sign-up or download. For visible colors, proven answers are labeled. Unknown colors? Mark each question mark layer as ? and it plans to the next reveal. A search may reach its limit without a conclusion.

Updated

Play Potion Sort (free water sort puzzle)Potion Sort guide

Enter your tubes

1How many tubes does the level have?

Layers per tube (most levels use 4)

2Tap a tube, then tap its colors from the bottom up

Tube 1 is selected. Tap colors from the bottom layer up, and ? for a hidden layer.

Solve from a screenshot (beta)

Importing a level from a screenshot is not available yet. We are checking whether it would save you time, so opening this note is the only signal we record. For now, enter the tubes above; Try an example shows how.

Glass test tubes in a wooden rack, each holding layered colored liquids being sorted, on an alchemist table.

How do you solve a water sort puzzle?

Every water sort level rests on one rule: each color fills exactly one tube. If a tube holds four layers, every color on the shelf has exactly four layers, and the level is done when each color is gathered into its own tube. That rule is a test for every pour — it should either collect a color or unblock the layers of one. A pour that does neither is spending space you will want back later.

Work the shelf in this order:

  1. Find the most-buried color before your first pour. Count the layers sitting on top of each color; the deepest one is the level's real difficulty, so aim your opening pours at reaching it instead of the easy pours that fill your spare tubes.
  2. Guard one empty tube. An empty tube is the only space that accepts any color. Treat it as an emergency fund and spend it only when a pour finishes a color or frees a buried layer.
  3. Feed deep runs first. A tube with three layers of one color on top is nearly finished; adding the fourth trades storage for a tube you never think about again.
  4. Pour runs, not single layers. The whole top run of one color travels as much as fits, so plan room for the full run and use partial pours on purpose.

Two traps end most runs. The two-color lock: red sits under blue in one tube while blue sits under red in another, and neither bottom can move without a matching top or your empty tube. The spent shelf: two half-empty tubes of mixed colors with no empty left to untangle them. When nothing looks safe, dismantle your worst mixed tube completely — playing around it costs more pours than breaking it.

On a starter shelf of two tubes alternating red and orange with two empties, the plan is visible before you start: park the top layers in the empty tubes, gather red into one tube until it fills, and the orange layers then stack onto each other with nothing left to block them. Hard levels use the same plan — read the buried layers, buy room with your empty tube, finish one color at a time. The full set of habits is in how to solve water sort puzzles.

Three water sort examples to try

These fixed examples each use four tubes with four layers per tube. Load one, then press Solve. Loading replaces the current tubes; Undo last edit brings your input back. The Try an example button above still makes a fresh random board.

A regular four-layer board

Two tubes alternate Red and Orange, with two empty tubes for working space. Solve finds a proven shortest answer of 7 pours; use Next to follow each pour.

A board with hidden colors

Each filled tube hides one layer behind ?. The first plan pours from tube 1 into tube 3 and pauses when a hidden layer shows in tube 1. For this sample, choose Red when it appears. The counts then identify the remaining ? as Orange and the solver finds the rest of the pours.

A color count copied incorrectly

Red has 5 layers and Orange has 3, but each color needs 4. Solve flags both counts and asks you to correct the input before searching for moves. A color-count error is not an unsolvable-board result.

Water sort solver facts at a glance

The water sort solver handles 4 to 14 tubes holding 3, 4 or 5 layers each, with up to 12 colors and hidden ? layers. A solved visible-color board gets numbered pours labeled to show whether the fewest pours are proven. Hidden-color plans pause for you to enter each revealed color. It is free and runs in your browser.

Source: the limits checked in this solver's code. Updated .
Tubes4 to 14, empty tubes included
Layers per tube3, 4 or 5 (most levels use 4)
ColorsUp to 12; each color must fill exactly one tube
Hidden ? layersPlanned around: pours never depend on a hidden color, you tap each color as it is uncovered, and layers the counts already prove are filled in for you
ResultVisible colors: numbered pours and a replay, labeled proven fewest or “not guaranteed shortest”. Hidden ?: a plan to the next reveal, then enter its color
Unsolvable levelsA visible-color board is reported impossible only after every reachable arrangement was tried. A search-limit stop is not proof of impossibility; wrong color counts are flagged separately
Share linkCopy level link stores the board; opening it recalculates the moves
Where it runsIn your browser; the level is not uploaded
PriceFree, no account, no download

How to use the water sort solver step by step

  1. Count your tubes. Tap the number that matches your level, empty tubes included. Then pick how many layers fit in one tube: most water sort and ball sort levels use 4, some use 3 or 5.
  2. Copy each tube from the bottom up. Tap a tube, then tap the color of its bottom layer, the next layer and so on up to the top. A full tube moves you to the next one automatically, and Undo layer takes back a wrong tap.
  3. Leave empty tubes empty, and mark hidden layers with ?. Each color button counts the layers you have placed, for example 3/4, so a miscounted color is easy to spot. A layer your game hides behind a question mark gets the ? button.
  4. Press Solve. You get a numbered list of moves such as “Move 1: tube 3 → tube 7”. Use Next and Back to see the tubes after each move, or Play to watch them all. With ? layers, tap the color each uncovered layer shows to go on.
  5. Keep the answer. Copy all steps puts the current move list on your clipboard. Copy level link saves the board so you can reopen it and calculate the moves again.

Tubes are numbered left to right, top row first, in the order you entered them. If your game shows two rows of tubes, enter the top row first. There is no database of numbered levels here: the solver searches from the board you enter, using the pour rules explained below. It accepts 4–14 tubes with 3, 4 or 5 layers each. If a color count is off, the solver shows every color against the layers a tube holds and marks what is wrong.

Want to get faster without help? Practice with our free water sort game, Potion Sort, which deals new shelves every day.

Water sort tips for any level

For the habits behind fast runs — reading buried layers, spending your empty tube well, avoiding the two-color lock — read how to solve water sort puzzles.

Copying a stuck level from a water sort app

  1. Take a screenshot. Copying from a still picture is easier than switching back and forth, and you can check your tubes against it before you solve.
  2. Count tubes and layers. Count every tube, empty ones included, and how many layers a full tube holds. Most apps use 4; some levels use 3 or 5.
  3. Pick one color per potion. The colors here do not have to match your app exactly. Use one solver color for each color in the app and keep it the same in every tube.
  4. Enter tubes in reading order. Go left to right, top row first if the app shows two rows, and fill each tube from the bottom layer up.
  5. Check the counters, then solve. Every color needs a full tube of layers, such as 4/4. Press Solve, make the same moves in your app, and use Copy level link to keep the answer or send it to a friend.

How the solver works

The solver uses the same pour rules as Potion Sort, with 3, 4 or 5 layers per tube. For visible-color boards it first searches for the fewest pours. A result labeled “No solution has fewer pours” is a proof; a fallback answer is labeled “not guaranteed shortest”. It reports a visible-color board impossible only after checking every reachable arrangement. If it reaches its search limit without an answer, it says “No solution found”, which does not prove the level impossible. With hidden layers it compares plans that uncover one without pouring a hidden color, then asks you which color appears. These reveal plans are not guaranteed shortest, and a complete solution cannot be guaranteed before the hidden colors are known. Everything runs in your browser, and it never shows Potion Sort’s daily puzzles.

Frequently asked questions

I am stuck on a water sort level. How does this solver help?

Enter the tubes exactly as your game shows them: set the number of tubes and how many layers each holds, tap a tube, then tap its colors from the bottom up, and press Solve. A level you have already started works too — copy the tubes as they look right now, half-full ones included. There is no level database here; the solver searches from the tubes you enter. Use 4–14 tubes with 3, 4 or 5 layers and the pour rules described on this page; mark hidden layers with ?.

Why does the solver say invalid or no solution?

“Invalid” means the current entries need fixing: the result names the color or tube and gives the count to correct. Each color must fill one tube. For an unsolvable result, check color counts, missed empty tubes, hidden ? layers entered as colors, and Layers per tube. Use the linked controls in the result to correct your entries, then press Solve again. A one-tap fix may be offered. “No solution found” means the search limit was reached; it does not prove the level impossible.

How many tubes and layers can it solve?

From 4 to 14 tubes with 3, 4 or 5 layers per tube. Each color’s total must fill one tube; layers your game hides can be marked ?. If your tubes hold 6 layers, or you want the fewest single-ball moves in a ball sort game, use the Ball Sort Puzzle Solver.

How does the share link work?

Copy level link saves the tube contents and layers per tube in the link itself. Open it on another device and the solver recalculates the moves from that board; replay starts from the beginning. It does not save your current replay step. The level is not uploaded, and nothing is stored on a server.

What does this solver have to do with the Potion Sort game?

Potion Sort is our free water sort puzzle, and this tool grew out of it: the solver uses the same pour rules, and the search Potion Sort uses to check that every daily shelf can be finished is one of the searches it runs. The solver itself is standalone — it never shows Potion Sort’s puzzles, and it accepts any board within the tube and layer limits above, using the pour rules described on this page.

Does it work for ball sort and color sort puzzles?

Yes, for color sort puzzles that use the same pour rules as water sort. For ball sort, a move of two or three layers is the same number of single-ball moves from that tube to the same target, one after another. Tubes can hold 3, 4 or 5 layers or balls. For the fewest single-ball moves, or tubes of 6 balls, use the Ball Sort Puzzle Solver.

Can it solve levels with unknown colors or question marks?

Yes. Tap ? for every layer your game hides. The solver plans legal pours up to the pour that uncovers a hidden layer. Make those pours, then enter the color that shows to calculate the next plan. It cannot predict hidden colors or guarantee a complete solution before they are known. When the counts already prove what a hidden layer must be, it fills that in for you.

Is the water sort puzzle solver free?

Yes. It is free, with no account and no download, and it runs in your browser. The level you enter is solved on your device, and a level link keeps the tubes in the link itself.

More puzzle solvers

Sorting puzzles

Grid and logic puzzles

Cards, words and colors

All tools